Bestway 58628E, Руководство пользователя

Страница: 7 / 8

TROUBLE SHOOTING
WARNING: Turn off the pump before performing cleaning, maintenance and troubleshooting.
The cleaner stops operating for the following reason:
Problem Solution
Stop the filter pump or sand filter, purge the air and start again.
For assistance, please visit the support section on our website,
www.bestwaycorp.com.
Reduce the length of the hoses follow instruction manual.
Turn off the pump, reconnect the product at the diagonal position of the pool,
the water hose should be in a C shape, the product should be place into the
water in the direction of the water hose.
Stop the pump, take out the cleaner from the water and remove the debris.
Filter pump
- Stop the pump, block the connector A and B to avoid water flowing out from
the pool, and clean the filter cartridge or replace if necessary.
Sand filter pump
- Disconnect the cleaner from the pool, perform backwash and rinse to clean
the sand.
Check if the diaphragm has any holes or breakage. If so, follow the
instructions on how to replace the diaphragm
Check the bottom of the pool. If there are wrinkles, level the pool to reduce
them.
Check to see if the debris screen inside of the head is dirty. Clean the debris
screen.
Check to see if the filter cartridge or filter sand is dirty. Clean the filter
cartridge or back wash the filter sand.
Move the Pouring Weight backward.
- Air inside the pump
- The hose is too long
- The hoses are entangled
- The debris screen inside the cleaner head is full of debris
- The filter cartridge or sand is too dirty
- The diaphragm is broken
- The cleaner is stuck on wrinkles
7