WARNING!
THIS IS NOT A TOY!
- Do not let children use or play with the cleaner. Assemble and disassemble this product by adult only.
- Do not allow swimming in the pool while the cleaner is in use.
- TURN OFF THE PUMP before connecting cleaner to the pool.
- If there are stones, roots, or metal corrosion in contact with the bottom side of the liner, clean them out before installing the cleaner. If necessary,
have a qualified professional do the cleaning.
- If the liner is brittle, damaged or wrinkled, have a qualified professional perform the necessary repairs or liner replacement before installing the
cleaner.
- Make sure the cleaner is not in the pool during any chemical sanitization.
- TURN OFF THE PUMP before servicing the cleaner or performing any maintenance.
NOTE:
Drawings for illustration purpose only. May not reflect actual product. Not to scale.
SAVE THESE INSTRUCTIONS
Automatic Pool Cleaner for Above Ground Pools
Cleans the bottom of your pool automatically. Works with all major brands of soft-wall pools. This product includes 24.5 ft. (7.50 m) of hose to fit pool
sizes up to 22 ft. (6.71 m).
This is a unique automatic above ground pool cleaner that is compatible with sand filters as low as 800 gal./h (3,028 L/h) and up to
3,000 gal./h (11,356 L/h), and compatible with filter pumps as low as 1,000 gal./h (3,785 L/h) and up to 2,500 gal./h (9,463 L/h).
The Automatic Pool Cleaner has a built-in filter that prevents clogging of your hoses and filter system. Before connecting the Automatic Pool
Cleaner, inspect the unit to make sure the bottom plate is properly locked in position and that the mesh bag is clean.
IMPORTANT:
Wait 4 hours to use the cleaner after chemical maintenance. The high level of chemicals will damage the diaphragm.
IMPORTANT:
After every use, the diaphragm needs to be washed with clean water for 1 minute.
2
OWNER’S MANUAL
AQUASWEEPER
Connect F - K - B - A in order, then connect the long hose sections (A+A+A...)
For 22 ft. (6.71 m) round & rectangular pools, connect all 10 long hoses (A+B).
For pools smaller than 22 ft. (6.71 m), reduce the number of long hoses (A)
simultaneously until total length of hose assembly is equivalent to the length
from skimmer/dedicated suction line to the farthest point in the pool plus a
length equal to hoses A. (Fig. 1)
Fig. 1
WARNING
INSTRUCTIONS
HOSE SECTION ASSEMBLY
A. Long hose B. Long hose D. Pouring weight
F
1
. Connector F
2
. Connector F
3
. Connector K. Regulator valve
2
PARTS REFERENCE OVERVIEW
Содержание 58628E
Страница 1: ...58628E www bestwaycorp com...
