Instruction manual
17
English
5. Switch on the device by moving the on/off switch (5) to position I.
6. Move the trimmer head diagonally across your skin to remove the unwanted hairs.
OPERATION - Telescopic trimmer
1. Make sure the on/off switch (5) is in the 0 (off) position. Remove the attachable
comb by holding by the lip at the rear and clicking upwards.
2. Press the telescopic trimmer out with your thumb (4). See figure 5.
3. Now switch on the device again.
4. Move the trimmer head diagonally across your skin to remove the unwanted hairs.
5. After use, switch off the device by moving the on/off switch (5) to the 0 position and
slide the trimmer back in.
Figure 5
OPERATION - Shaver head
1. Make sure the on/off switch (5) is in the 0 (off) position.
2. Place the lip on the bottom of the shaver head (3) in the oblique opening on the
casing (1). See figure 6. Press the top of the head forward to click the head into
place.
To remove the head, hold the top of the head and pull it backwards. Do so only
when the device is switched off.
3. Switch on the device by moving the on/off switch (5) to position I.
4. Move the shaver head diagonally across your skin in circular movements to
remove the unwanted hairs. Do not press the shaver head too hard against
your skin. This could damage both your skin and the shaver head.
5. After use, switch off the device by moving the on/off switch (5) to the 0 position.
The extra comb (11) can be used to style your hair after using the device.
Figure 6
CLEANING AND MAINTENANCE
1. After using the trimmer, remove the hairs from the blade using the brush.
2. After using the shaver head, remove the head from the device. Empty by tapping gently on a flat
surface, with the underside facing down. Remove the hairs from the casing using the brush.
3. Wipe over with a clean dry cloth.
4. Oil the device once a month with the oil provided.
• Make sure the device is not connected to the mains by the adapter when you are cleaning it.
• Never use harsh or corrosive cleaning agents or sharp objects (such as knives or hard brushes)
when
cleaning.
GUARANTEE TERMS
The importer guarantees the appliance against defects caused by manufacturing and/or material faults for
60 months from the date of purchase, subject to the following conditions.
1. No charges will be made for labour costs or materials during the warranty period. Any repairs carried
out during the warranty period do not extend the warranty period.
2. The importer automatically becomes the owner of any faulty parts that he replaces or a faulty
appliance (in the event of replacement of the appliance).
3. All claims submitted under warranty must be accompanied by the original bill of sale.
4. Claims under warranty must be submitted to the dealer where the appliance was purchased or to the
importer.
5. The warranty is issued solely to the first purchaser and cannot be transferred.
6. The warranty does not cover damage caused by:
a. Accidents, incorrect use, wear and/or neglect.
b. Faulty installation and/or use in a manner contravening the prevailing legal, technical or safety
regulations.
c. Connection to a mains voltage other than the voltage specified on the type plate.
d. Unauthorized modifications.
e. Repairs carried out by third parties.
f. Careless transport, i.e. without suitable packaging materials or protection.
7. No claims may be made under this warranty for:
a. Losses incurred during transport.
