P8 - 75152 Rev. C 0416
Installation Instructions - PowerBoard
®
© 2016 Bestop, Inc.
Page 8
Hardware
Step 2
Step 1
Section 5
Connect Trigger Wires
Step 2
Posi-Tap
®
Part # 470.03
Qty. 1 per door
Step 1
3/8”
Passenger Side - Use the Posi-Taps
®
to connect
the trigger wires to the matching wires in the
factory loom.
- Violet / White wire in loom coming from the
front door
- Violet /Yellow and Violet/Grey in main loom
in the door sill
NOTE: Occasionally the actual wire color may be
different than the one stated here, or there may
be more than one wire with the same color.
You will need to install the motor and test each
wire until you find the wire that functions properly.
Driver Side - Route the trigger wire under the
carpet to the door sill. Use a PosiTap
®
to
connect to the violet wire coming from the door.
NOTE: Occasionally the actual wire color may be
different than the one stated here, or there may
be more than one wire with the same color.
You will need to install the motor and test each
wire until you find the wire that functions properly.
