Installation Instructions - Trek Top PRO 2
© 2018 Bestop, Inc.
Section 24
Attach #2 Bow Assembly to Header/Side Bow Assembly
Step 1
Step 2
Unzip the sport bar cover over the
middle cross bar between the front
and rear doors, to expose the sport
bar corner plate, and two factory-
installed hex-head bolts.
Attach the Right #2 Bow Pivot Bracket
#541.88 to the right side sport bar
plate using the two factory bolts.
Zip the sport bar cover closed, locate
the vertical tab on the #2 Bow Pivot
Bracket, and slit the sport bar cover
to allow this tab to protrude from the
cover.
Repeat on the left side of the Jeep
using the #541.87 Pivot Bracket.
Step 1
541.87 541.88
541.18 - #2 Bow Assembly
Hardware
Tools
13mm Socket
Ratchet
Attach #2 Bow #541.18 to the #2 Bow
Pivot Brackets on each side.
1
Pull out on the knob to release
the spring-loaded catch on the #2
Bow rear legs, and
2
Slide the slotted end of the catch
over the #2 Bow Pivot Bracket tab
protruding from the sport bar cover.
Make sure that the spring catch snaps
into place on each #2 Bow Pivot
Bracket tab.
Step 2
1
2
#2 Bow Assembly
#541.18
Qty. 1
#2 Bow Pivot Bracket
#541.88 - Right (shown)
#541.87 - Left
Qty. 1 per side
