Installation Instructions - Trek Top PRO 2
© 2018 Bestop, Inc.
Section 9
Install Halo
Step 1
Install the Right and Left Halo, #509.76
and #509.77 to the Window Carrier.
Install the tab feature on the upper
section of the Halo in the open end of
the Window Carrier. Secure with two (2)
M6x25 Screws #431.62 and two (2) M6
Flat Washers #257.93 from the out-
side, and two (2) M6 Nylon Lock Nuts
#494.01 from the inside in the outer-
most holes on each side.
Tighten screws just snug at this time so
that the Halo can be adjusted.
All fasteners will be tightened later in
the installation process.
10mm Wrench
4mm Allen
Wrench
Step 1
Hardware
494.01 431.62
509.77
509.76
257.93
M6 Flat Washer
Part #257.92
Qty. 2
M6 x 25 Screw
Part #431.62
Qty. 2
Halo - Left
Part #509.77
Qty. 1
Halo - Right
Part #509.76
Qty. 1
M6 Nylon Lock Nut
Part #494.01
Qty. 2