background image

Rev. B 0912

53819 pg. 10

Halftop – Installation Instructions

Opening the Rear Window

Opening Window 

The window may be opened partially or completely 
by unzipping it. If completely unzipped it may be 
folded down and left in place. 

Removing Window

 

To remove the window completely, unzip it and re-
lease the snaps at the bottom corners. Then release 
the Hook and Loop strip along the bottom of the 
window opening. 

Reinstalling Window

 

In order to reinstall the window all the zipper slides 
must be together at the end of the zipper or they 
will not catch properly. Close the zipper, secure the 
Hook and Loop strip along the bottom and attach 
the snaps on the corners.

Snap

Hook and 
Loop

Zipper

Rear Window

To Start Zipper - Sliders 
must be together

DO NOT Open the Sun Roof while driving.

DO NOT Open the Sun Roof while driving.

To Secure the Top with Sunroof Open - Option A

Release the hook and loop above the doors. As you fold the Windshield Header Assembly back on top of the 
deck, pull the loose fabric up and   back at the midpoint between the header and Center Bow, allowing the 
fabric to fold, accordion style on top  of the deck. 

Hook the plastic clip on the J-Clip Strap to the rear edge of the Windshield Header Assembly to secure the 
Sun Roof. 

Sport Bar

Deck 
Fabric

J-Clip Strap

Windshield Header 
Assembly

To Secure the Top with Sunroof Open - Option B

Release the hook and loop above the doors. As you fold the Windshield Header Assembly back on top of 
the deck, pull the loose fabric in the center down into the vehicle in front of the Sport Bar and roll the fabric 
inside the vehicle. Tuck in the loose fabric on the ends.

Hook the plastic clip on the J-Clip Strap to the rear edge of the Windshield Header Assembly to secure the 
Sun Roof and the rolled fabric inside the vehicle.

Roll Fabric 
inside vehicle

Tuck Fabric in 
above doors

Catch Rolled 
Fabric in J-Clip 
Strap

Deck Fabric

J-Clip Strap

Windshield Header 
Assembly

Sport 
Bar

Содержание 53819












Отзывы: