background image

Rev. B 0912

53819 pg. 6

Halftop – Installation Instructions

Web Strap through 
Footman Loop

Secure Mesh Divider

Locate the web strap sewn inside the top. Make 
sure that it is above the Sport Bar and pull it to the 
windshield. Thread the end of the strap through the 
Footman Loop on the windshield frame and then 
loosely back through the buckle on the strap. DO 
NOT tighten the strap at this time.

Thread Strap through 
Footman Loop

Thread Loosely 
through Buckle

Threading Strap 
through Buckle

Buckle

Strap

Rotate the Windshield Header forward and lay it 
along the top of the windshield frame. 

Locate plastic strip sewn to the bottom of the mesh 
divider inside the vehicle. Roll the plastic into the “Z” 
Channel.

Mesh Divider

“Z” Channel

Roll Plastic 
Strip into “Z” 
Channel

Open the Windshield Header and stand inside the 
vehicle to access the front of the assembly. Wrap 
the front edge of the Halftop Fabric around the front 
edge of the Windshield Header. Make sure that the 
fabric is centered on the header. Press the plastic 
retainer along the front of the top into the channel 
on the header until it 

snaps

 into the channel.

Make sure the plastic retainer is 
snapped 

fi rmly

 into the Header 

channel. The Sun Roof feature will not work 
properly if the retainer is not securely installed.

Wrap Fabric around 
Windshield Header and 
snap plastic retainer 
into channel in header

Attach Halftop to Windshield 
Header

NOTE

Содержание 53819












Отзывы: