Sunrider
®
– Installation Instructions
Rev. D 1208
51719 pg. 11
Install Rear Window
Rear
Window
Slip Plastic Strip
under Tailgate
Retainer Mount
Tailgate
Retainer
Mount
Tailgate
must be
open
Slide groove in Tailgate
Bar onto tube on inside
of Rear Window. Push
it into Tailgate Retainer
Mount.
Tailgate
Bar
Tailgate
Retainer
Mount
Tube on inside of
Rear Curtain
Tailgate Bar - Oriented
with Rubber Bulb Down
Fabric
Plastic
Strip
Start Zipper
Here
Tuck Plastic Strip
under Belt Rail
Wrap fl ap around
Door Surround and
fasten Hook and
Loop
Find the Left and Right Quarter Windows and orient
them with the zipper toward the inside. Start the zip-
per at the front corner and close it half way.
Slip the plastic strip on the bottom of the Quarter
Window into the belt rail built into the vehicle.
Wrap fabric fl ap on the front of the Quarter Window
around the Door Surround and fasten the hook and
loop strips to each other. Close the zipper to the
bottom rear corner.
Tuck the top of the Quarter Window smoothly under
the top.
Belt
Rail
Plastic
Strip
Fabric
Install Quarter Windows
Open the tailgate. Orient the Tailgate Bar with the
rubber bulb facing down, in order to form a seal
with the top of the tailgate. Slide the groove in the
Tailgate Bar onto the tube inside the bottom of the
Rear Window. Roll the Tailgate Bar into the top of
the Tailgate Retainer Mounts. Slip the plastic on the
bottom of the Rear Window under the bottom part of
the Tailgate Retainer Mounts. Close the rear curtain
zippers.
