Pet Barrier – Installation Instructions
Rev. F 0114
42502 pg. 2
Parts List and Hardware Identifi cation
M6 Lock Nut,
Qty - 8
M6 Washer,
Qty - 20
M8 Washer,
Qty - 4
M8 Lock Nut (Nyloc
Nut), Qty - 2
M6 Spring
Washer,
Qty - 2
Upper Partition,
Qty - 1
Lower Partition,
Qty - 1
Use a 4mm allen wrench, two (2) M6 x 45mm Button
Head Screws, and two (2 ) M6 Washers to install
a Rectangular Base Bracket and the Right Base
Bracket on the passenger side rear outboard seat
mount. Repeat on the other side of the vehicle.
For easiest installation, remove the rear
seat prior to installing the Pet Barrier.
Install Rectangular Base
Brackets and Base Brackets
M6 x 35mm Button Head Screw, Qty - 4
M6 x 45mm Button Head Screw, Qty - 4
M6 x 25mm Button Head Screw, Qty - 6
M8 x 35mm Hex Bolt, Qty - 2
M6 x 15 Thumbscrew, Part
Number 495.60, Qty - 2
M6 x 20 Thumbscrew, Part
Number 495.61, Qty - 2
Left Middle
Bracket, Qty - 1
Right Middle
Bracket, Qty - 1
Rectangular Base
Bracket, Qty - 2
Left Base
Bracket, Qty - 1
Right Base
Bracket, Qty - 1
Upper Connecting
Bracket, Qty - 2
Upper Mounting
Bracket, Qty - 2
Rectangular Base
Bracket
Right Base
Bracket
M6 Washers
M6 x 45mm
Button Head
Screws
Soft Top Only
