Pet Barrier – Installation Instructions
Rev. F 0114
42502 pg. 4
Use a 4mm allen wrench and a 10mm wrench with
two (2) M6 x 25mm Button Head Screws, four (4)
M6 Washers and two (2) M6 Lock Nuts to secure
an Upper Mounting Bracket to the Upper Partition.
Do not tighten fasteners. Repeat on both sides.
Use a 4mm allen wrench and a
10mm wrench with four (4) M6
x 35mm Button Head Screws,
eight (8) M6 Washers and four
(4) M6 Lock Nuts to secure the
Upper Partition to the Lower
Partition.
Install Upper Mounting Bracket
on Upper Partition
Mount Upper Partition Assembly
to Upper Connecting Bracket
Secure Upper Partition to Lower
Partition
Use the M6 x 20mm Thumbscrews to secure the
Upper Partition to the Upper Connecting Brackets.
Reinstall the rear seat if you removed it prior to
beginning the installation.
Reinstall Rear Seat
Tighten Fasteners on Upper
Mounting Brackets
Use a 4mm allen wrench and 10mm wrench to tight-
en the fasteners on the Upper Mounting Brackets.
Upper Mounting
Bracket
Upper
Partition
M6 x 25mm Button
Head Screws
M6 Washers and
M6 Lock Nuts
Upper Connecting
Bracket
M6 x 20mm
Thumbscrew
M6 x 35mm Button
Head Screw
M6 Washers
M6 Lock Nut
Upper Partition
Lower Partition
