8
Overall dimensions
Model No’s: BLGSW60CF & BLGSW60C
BLGS60CF & BLGS60C
BLGS60EF & BLGS60E
BLGSW60EF & BLGSW60E
Model No’s: BLGSW705CF & BLGSW705C
BLGSW704CF & BLGSW704C
Model No: BLGSW905CF & BLGSW905C
Model No: BLGSW30CF & BLGSW30C
Installation dimensions & clearances
Only an authorised person should connect this ap-
pliance.
Check that the appliance is in good condition after
having removed the outer packaging and internal
wrappings from around the various loose parts.
Never leave the packaging materials (cardboard,
bags, polystyrene foam, staples, etc.) within chil-
dren’s reach since they could become potential
sources of danger.
These built-in cooktops are intended to be inserted
in a bench top cut-out. For cut-out dimensions refer
figure and chart following. Always comply with
measurements given for the cut-out into which the
appliance will be recessed.
Model No
A
B
BLGSW60CF
BLGSW60C
BLGSW60EF
BLGSW60E
BLGS60EF
BLGS60E
BLGS60CF
BLGS60CF
560
480
BLGSW705CF
BLGSW705C
BLGSW704CF
BLGSW704C
635
480
BLGSW90CF
BBLGSW90C
BLGSW30CF
BLGSW30C
830
270
480
480
Overhead clearances
A range hood fitted above the top must be installed
according to the installation instructions for the
range hood. A minimum distance of 650 mm is re-
quired for a range hood and 750 mm for an exhaust
fan. Minimum clearance to an overhead cupboard is
600 mm.
Side clearances
If the distance measured from the periphery of the
nearest burner to any vertical surface is less than
200 mm, the surface shall be protected in accord-
ance with clauses 5.12.1.1 & 5.12.1.2 of AS5601.
Bottom clearances
If an oven is positioned below the cooktop the barrier
does not need to be fitted, but a space of 60 mm
must be maintained between the underside of the
cooktop and the top of the oven.
