7
3 INSTALLMENT AND DEPLOYMENT
IMPORTANT!
Read all the machine manuals and safety instructions with care before unpacking
or installing of the machine!
NOTE! Make sure that installment is carried out by a qualified person.
3.1 Handling and storing the machine
The machine has been packed on platform suitable for lifting- and/or trucking
handling. The machine must be lift from the 4 brackets located in the corners.
Unpack the machine and check its` visible condition. You are allowed to operate
and store the machine in humidity controlled facilities with a temperature over
+10 °C.
3.2 Deployment
READ THE FOLLOWING NOTIFICATIONS WITH CARE BEFORE THE
DEPLOYMENT:
BE CAUTIOUS AND COMPLY WITH GENERAL INSTRUCTIONS GIVEN ON
LIFTING WORKING!!
THE WORKPIECE MUST BE ELECTRICALLY GROUNDED. ALLWAYS USE
THE MACHINE`S OWN ELECTRICAL GROUND CONNECTION AND
FURTHER GROUND-CONNECT DIRECTLY TO THE WORKPIECE IF
WELDING CURRENT EXCEEDS 500 AMPERES OR THE PIECE IS LARGE.
USE GROUND
CAPLE 70-95 (ABI-
CM 70-95 OR
EQUIVALENT) TO
THE MACHINE`S
OWN GROUND
CONNECTION
