12
4.2.2 Remote control
All the machines come with voltage protected 24 V remote control. The machine
functions are set via remote control.
1. Lifting the table plate
2. Lower the table plate
3. Tilting the table plate forward
4. Tilting the table plate backward
5. Rotating the table plate clockwise
6. Rotating the table plate anticlockwise
Continuous clockwise rotation: Press button (5.) and hold it. Next press button
(6.) and release button (6.), after which you can release button (5.). After this the
table plate continuously rotates clockwise, during which the rotation speed can
be adjusted from the knob-controller located in the front end of the remote. The
continuous rotation is stopped by pressing buttons (5.), (6.) or . The continuos
anticlockwise rotation can be employed by following the procedure above in
reverse order.
AFTER AN EMERGENCY SWITCH-OFF SITUATION, IT MUST BE FIRST
ESTABLISHED THAT THE IS DANGER NO LONGER EFFECTIVE BEFORE
TURNING THE MACHINE ON!
DO NOT STEER THE WORKPIECE TO THE FLOOR.
WHEN ROTATING THE WORKPIECE, START WITH AS LOW SPEED AS
POSSIBLE ENSURING THAT THE BALANCE POSITION OF THE MACHINE
DOES NOT SHIFT. IF NEEDED, RAISE THE ROTATION SPEED; STILL
PAYING CLOSE ATTENTION TO THE BALANCE POSITION.
NOTIFY THE POSSIBLE DANGER AREAS CAUSED BY THE MACHINE AND
THE WORKPIECE. BE CAREFUL WITH THE MOVING PARTS OF THE
MACHINE AND ALWAYS FOLLOW THE MOVEMENT OF THE MACHINE
THROUGHOUT THE WORKING PROCESS.
