Best Fitness BFLA100, Руководство пользователя

Страница: 12 / 18

12
s t e P
2
Be careful to assemble all components
in the sequence they are presented.
nOte:
Finger tighten all hardware first in this step. wrench tighten ALL hardware at the
end of steP
2B . some components may be pre-assembled. nylon lock nuts will not
fully screw onto bolts, they must be wrench tighten to fully go on.
2A. Attach top Frame (D) to chrome upright (B) using:
2 - (#2) M12X70mm Hex Head Bolt
4 - (#7) M12 Flat washer
2 - (#9) M12 nylon Lock nut
2B. Attach top Frame (D) to top Frame of the Power rack (L) using:
2 - (#3) M10X80mm Hex Head Bolt
4 - (#8) M10 Flat washer
2 - (#10) M10 nylon Lock nut
1 - (#24) steel Plate
2c. route top cable (#20) and install four Pulleys (#15) as shown in
step 2 Drawing using:
4 - (#5) M10X50mm Hex Head Bolt
8 - (#8) M10 Flat washer
4 - (#10) M10 nylon Lock nut
2 - (e) steel Plate
2D. Attach chain (4pcs) Link (#18) to the eyelet end of top cable (#20)
2e. Attach chain (4pcs) Link (#18) to sliding Frame (c).
2F. route Low cable (#19) and install three Pulleys (#15) as shown in
step 2 Drawing using:
1 - (#5) M10X50mm Hex Head Bolt
2 - (#4) M10X65mm Hex Head Bolt
6 - (#8) M10 Flat washer
3 - (#10) M10 nylon Lock nut
2 - (e) steel Plate
2g. Attach chain Link (#18) to the eyelet end of Low cable (#19)
2H. Attach chain Link (#18) to Base Frame (A).