BEST ACCESS SYSTEMS AD432, Руководство по обслуживанию

Страница: 25 / 54

Service and Maintenance
Key Combinator Service Manual 3–9
R
EPLACING PARTS
Replacing the
punch and die
To remove the punch and die:
1. Make sure that the operating lever is in the upright position.
2. Remove the depth selector ( page 3–7 ). Save all of the parts.
3. Remove the punch and die assembly. See Figure 3.7 .
Note: The spring that sits below the punch and die assembly can pop
out during removal.
Figure 3.7 Punch and die assembly
Side view of combinator
Spring
Punch
Die assembly