BEST ACCESS SYSTEMS AD432 Скачать руководство пользователя страница 50

Страница: 50 / 54

Glossary

A–2

Key Combinator Service Manual

Key combinator

Machine that notches cuts into BEST key blanks for BEST masterkey
systems.

Keycut

Notch in a key that fits a corresponding pin segment of a core.

Keycut depth

Distance from the bottom of the keycut to the underside of the key
blade.

Key gauge

AD502 gauge that measures keycut depths. This gauge is used to
calibrate the key combinator.

Keying system

Method of keying locks.

Keyway

Cross-section shape milled into the key blank and broached into core
plugs.

Left-handed key

combinator

Key combinator that cuts only patented or left-handed premium keys.

Masterkeying

Process of combinating locks to allow a single key to operate many
locks and to allow each lock to be operated by a unique key at the same
time.

Punch and die

Part of the key combinator that notches keys to a precise shape.

Right-handed key

combinator

Key combinator that cuts only standard or right-handed premium keys.

Setup stroke

First stroke of the operating lever that positions the key for cutting.

Содержание AD432























































Результаты поиска

Содержание AD432

Отзывы:

Бренды по названию

Популярные бренды

BEST ACCESS SYSTEMS AD432, Руководство по обслуживанию

Результаты поиска

Содержание AD432

Отзывы:

Бренды по названию

Популярные бренды