BEST ACCESS SYSTEMS AD432, Руководство по обслуживанию

Страница: 22 / 54

Service and Maintenance
3–6 Key Combinator Service Manual
4. Move the depth selector dial to the keycut depth number that you
need for your key. See Figure 3.4 .
Caution
Be sure to let go of the depth selector before making a cut. Any
pressure placed on the depth selector dial can cause the key to be cut
incorrectly.
5. Pull the operating lever down firmly until it strikes the rubber
bumper; then, let the operating lever move back up.
The combinator makes the first cut and automatically moves the key
carriage and key blank into place for the next cut.
6. Repeat Steps 3 and 4 until you have made all of the cuts on the key.
Unloading the
key
To unload a BEST standard key:
1. Gripping the key clamp knob, pull the key carriage completely
forward.
2. Turn the key clamp knob counterclockwise to open the key clamp
spring (for left-handed combinators, turn the key clamp knob
clockwise).
3. Slide the key out.
Figure 3.4 Cutting a key
ALIBRATE
YSTEM A2
Operating
lever
Rubber
bumper
Depth selector
assembly
Depth selector
dial