6
Note:
We recommend installing Lithium AA batteries for sensors.
The sensor LED indicator will light for 3 seconds, and then flash once per 16 seconds thereaf-
ter. Each time it flashes, the sensor is transmitting data.
Place the battery cover and push it to close the compartment.
Note:
If the sensor does not power up after inserting the batteries, press the reset button
shown in Figure 6.
Figure 6
3.4 Display Console
3.4.1 Display Console Layout
The display console layout is shown in Figure 7
Note:
The following illustration shows the full segment LCD display for description pur-
poses only and will not appear like this during normal operation.
Содержание RGT-SQ02
Страница 15: ...Figure 15 ...