17
1.
Time SYNC(default: ON).
Press the SET key again to set the network time sync. Press the
[+] key or [-] key to switch between SYNC time ON and SYNC time OFF of measure.
2.
12/24 Hour Format (default: 24h):
.Press the
SET
key again to adjust the 12/24 hour for-
mat setting (FMT). Press the [+] key or [
-
] key to change between 12 hour and 24 hour
format.
3.
Change Hour.
press the
SET
key again to set the hour. Press the [+] key or
[-]
key to adjust
the hour up or down. Note the PM icon is present during afternoon hours.
4.
Change Minute.
Press the
SET
key again to set the minute. Press the [+] key or [
-
] key to
adjust the minute up or down.
5.
Date Format (default: DATE): Press
the
SET
key again to enter the day/month format
mode. Press the [+] key to switch between MM-DD, DD-MM.
6.
Change Month.
Press the
SET
key again to set the calendar month. Press the [+] key or [
-
]
key to adjust the calendar month.
7.
Change Day.
Press the
SET
key again to set the calendar day. Press the [+] key or [
-
] key
to adjust the calendar day.
8.
Change Year. Press
the
SET
key again to set the calendar year. Press the [+] key or [
-
]
key to adjust the calendar year.
9.
Max/Min Clearing (default: ON)
. Press the
SET
key again to set the max/min clearing
mode (CLEARS). The Max/Min can be programmed to clear daily (at midnight) or manu-
ally. Press the [+] key or [
-
] key to switch between “Clears 24h” and Clears Manually.
10.
Temperature Units of Measure (default:
°C
):
. Press the
SET
key again to change the
temperature units of measure (the
UNITSET
icon will be displayed). Press the [+] key or [
-
] key to switch between °F and °C units of measure.
11.
Wind Speed Units of Measure (default: m/s)
. Press the
SET
key again to change the
wind speed units of measure . Press the [+] key or [
-
] key to toggle the wind speed units be-
tween m/s,ft/s, bft, knots, mph or km/h.
12.
Rainfall Units of Measure (default: mm)
. Press the
SET
key again to change the Rainfall
units of measure. Press[+] key or [
-
] key to toggle the rainfall units between mm and inch.
13.
Pressure Threshold Setting (default level 2).
Press the
SET(MODE)
key again to change
the pressure threshold. Press the [+] key or [
-
] key to change pressure threshold 2
mbar/hour to 4 mbar/hour.(For detailed information of this part please refer to 15.5)
14.
Weather Icons Setting (default: partly cloudy).
Press the
SET
key again to change the
initial weather icon. Press the [+] key or [
-
] key to select the initial weather icon of Sunny,
Cloudy, Partly Cloudy or Rainy. (For detailed information of this part please refer to 15.1
and 15.2)
15.
Sunlight Display Units(default: W/
㎡
)
. Press the
SET
key again to change the sunlight
units of measure. Press the [+] key or [
-
] key to toggle the sunlight units between ,
W/
㎡,
fc
or lux.
16.
Location division.(default: Northern Hemisphere)
.Press the SET(MODE) key again to
change the location division. Press the [+] key or [-] key to toggle the sunlight units North-
ern Hemisphere (NOR)or Southern Hemisphere(SOU).(refer to 5.0 Final Installation of In-
tegrated outdoor transmitter)
7.3 Sensor Search Mode
If Outdoor sensor loses communication, dashes (--.-) will be displayed.
Содержание RGT-SQ02
Страница 15: ...Figure 15 ...