Besantek BST-GFL31, Руководство пользователя

Страница: 22 / 33

BST-GFL31 User Manual
19
Fig 2.6.1.1
2) Determine new reference point:
A new reference point should be set on the lower branch with the highest signal. In this example, Branch
h was measured with the highest signal, as shown in Fig 2.6.1.2 (compared with Branch g).
Branch h Fig 2.6.1.2 Branch g
3) Set new reference point:
Set the new reference point on the branch with the highest signal. In this example, Branch h was used
as the new reference point. After setting the reference point to 100% for Branch h, the signal from
Branch g is now greater than 10%.
Branch h Fig 2.6.1.3 Branch g