Besantek BST-GFL31, Руководство пользователя

Страница: 4 / 33

▲ Safety Information
For your protection, please read this safety information completely before operating the locator. Carefully
observe all warnings, precautions and instructions.
WARNING:
Service information described in this manual is to be done by qualified personnel only. To
avoid electrical shock or equipment damage, do not service the instrument unless you are qualified and
with BESANTEK’s instruction.
DANGER
Safety testing has been done on this instrument thoroughly
before shipment. However, mishandling during use could
result in injury or other bad consequences, as well as damage
to the instrument. Make sure that you understand the
instructions and precautions in the manual before use. We
disclaim any responsibility for accidents or injuries not resulted
directly from instrument defects.
Safety Symbols
Description of symbols used in this manual.
WARNING
Indicates correct operation to prevent a significant hazard that
could result in serious injury or other bad consequences to
users or instrument.
NOTE
Indicates advisory items related to performance or correct
operation of the instrument.
▲ Operating Precautions
To avoid electrical shock or fire, read these precautions first before using the locator:

Except as explained in this manual, do not attempt to service this equipment yourself.

Do not operate the equipment around explosive gas or vapor.

Only use BESANTEK’s testing leads and other relative accessories with the locator.

Before use, inspect the locator, testing leads and other accessories for mechanical damage and
replace if necessary. Pay special attention to the insulation surrounding the connectors.

Remove all clamps, testing leads and accessories that are not in use.

Do not apply the instrument in other purposes that are not described in this user manual

Ensure the equipment is provided with adequate ventilation.

This manual describes the general operation of the testing system. If your system has features or
accessories not addressed in this manual, please contact your supplier.

Only qualified technicians are allowed to use the equipment. For fast ground fault location, it will be
very important and necessary to familiarize the tested environment, especially the wiring structure of
the target site.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com