-
BESANTEK
Plug
a current at an
approximative
frequency of 1 0kHz.
Plug Shown can
be different from
country to country.
The 10kHz
generated signal
current can be detected
using the Sniffer (Receiver).
Once the mains voltage is
connected to the Transmitter,
a Red Led will lit, indicating that
Power has been connected to the Tx.
Once the Red Led Lit, the Tx should
generate The 1 0kHz signal current into
wire or the circuit to trace.
Should the light not lit, check the internal
fuse. (First disconnect the plug from any
mains socket.)
The Transmitter can also be utilized
with flying Test leads, using one of the
optional adaptors.
The transmitter can work on
Tx
1 00V or 240V circuits, 50 or 60Hz.
f
Optional adaptors are available to
ON Indicator
trace faults and individual circuits or wires,
not in a conventional configuration.
-5-
