-
BESANTEK
Avoid bare hand to hand contact between the tester
and extended test leads.
When using the tester with test leads, ensure that
they are safe and properly authorized
Disconnect the tester from any external circuit when
checking or changing the Fuse and/or batteries.
CAUTION
&
READ THE MANUAL
Follow the instructions in the Manual for every
measurement. Read and understand the general
instructions before attempting to use this tester.
2. Safety Check
Before using the tester check the condition of the test
leads, the fuses and general appearance.
The leads must be free of cracks or any damages
and must be insulated as when they were new.
Fuse replacement is described later in this user's
manual.
When changing the fuse of the transmitter, by
removing the cover to access the internal circuitry,
always disconnect the leads.
When replacing the fuse use only the type specified,
HBC fuse, and insert correctly into the fuse holder.
Always double check the lead connections before
making any measurements.
-2-
