-19-
Check for cracks in any wires and sign of damages.
Verify that there are no cracks or damages on the
transmitter lead connection or on any of the optional
accessories.
Make sure the housing of the transmitter and receiver
are not damaged.
If there is any doubt, consult your nearest service
center.
Check the battery
When starting the receiver, ensure the battery is
healthy by checking hte Battery OK led.
Change the battery if this is not the case.
19. Replacing the battery
This instrument operate well with any type of 9V
battery. Due to it's very low consumption, it does not
requires alkaline or any other special type.
To replace the Battery, unfasten the small screw
situated at the back of the sniffer.
Then remove the battery cover. Make sure not to
loose the screw.
Remove the bad battery and replace with a new one.
The battery slide inside the battery compartment and
can not be inserted wrongly.
Follows the marking inside the battery compartment.
Re-insert the battery cover and screw.