-
BESANTEK
Power On
-
Led Indication
When the Transmitter is
connected to the power source,
the Led will LIT. This indicates
power is present on the
transmitter and current signal is
being transmitted in the wires.
-
-
8. Operating Instructions
(1) Connect the Transmitter to the socket (power
source), supplied by the circuit breaker to find
(CBTF). Ensure the Led lit on the transmitter.
Start the sniffer and point the tip on the wire which
is connected to the socket, in order to verify that
the sniffer can detect the transmitter. Switch the
sniffer OFF.
The Bar-Graph shows that the
sniffer can detect the cable
which is plugged into the
socket. That mean that the
transmitter is sending the
signal and that sniffer can
◄--
-i
receive it.
The bar-graph shows the
signal and the buzzer buzz
faster too.
THE SNIFFER
CHECKING THAT
IT'S DETECTING THE
CORD TO PROOF IT'S
WORKING CONDITION
The battery voltage is ok.
Experiment with the distance
and the angle of the sniffer to
get used to it and to get a feel
for the receiver.
Alwa s roof the Sniffer.