manualshive.com logo in svg

Besam PowerSwing, Руководство по установке

Поделиться
Скачать
Besam PowerSwing Скачать руководство пользователя страница 37

01-18-2001

37

PowerSwing    US23-0922-02

© Copyright 2006 Besam Entrance Solutions. May not be reprinted or reproduced without permission. 

Fire Door Installation

Besam F-50 Series Latch.

 Notes:

1.   The electro-magnetic latch release is located in line with the tripper button of 

the Von Duprin vertical rod exit device.

2.  Mounting of the latch release:
 A.  

If 

fi ller plate is required, mount to top surface of frame as shown, using 

mounting hardware provided.

 

B.   Close and latch the door. Depress the exit device tripper button, and hold 

with tape if needed.

 

C.   Hold latch release against top mounting surface of frame and center latch 

release trigger in line with the rod, with the tripper button just touching 
the trigger.

 

D.   Spot centers for four mounting holes, using the 490 mounting plate as a 

template.

 

E. 

 Remove latch release and tap or drill four holes for #10-24 machine screws 
or #10 sheet metal screws.

 

F. 

Mount latch release with hardware provided.

 

G.  Recheck unit trigger location per step C.

Handing of latch release may be changed by removing the “L” shaped cover and 
mounting plate and reassembling in opposite positions. The cable egress is a fl ex-
ible metal conduit with a 1-1/4 inch minimum bend radius.

Содержание PowerSwing













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды