manualshive.com logo in svg

Besam PowerSwing, Руководство по установке

Поделиться
Скачать
Besam PowerSwing Скачать руководство пользователя страница 14

PowerSwing    US23-0922-02

14

© Copyright 2006 Besam Entrance Solutions. May not be reprinted or reproduced without permission. 

Mechanical Installation

Installation

Establish the installation height X (PUSH) or Z (PULL) considering the arm 
system to be used:
– Pushing arm system, PUSH, see page 15.
–  Pulling arm system, PULL/PULL-P, see page 18. Note! If required, change 

the direction of rotation before mounting the operator, see page 17.

1. 

Fix the adapter plate to the wall.

2. 

Mount the cover mounting clips with end plates.

3. Mount 

the 

operator.

Arm System, PUSH

Mount arm system in accordance with the instructions and illustrations on pages 
15-16.

Arm System, PULL

Mount arm system in accordance with the instructions and illustrations on pages 
18-19.

Arm System PULL-P

Mount arm system in accordance with the instructions and illustrations on pages 
18-19 together with separate instructions enclosed with the arm system.

10-21-2002

Содержание PowerSwing













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды