![Besam PowerSwing Скачать руководство пользователя страница 13](http://html1.mh-extra.com/html/besam/powerswing/powerswing_installation-manual_2739553013.webp)
13
PowerSwing US23-0922-02
© Copyright 2006 Besam Entrance Solutions. May not be reprinted or reproduced without permission.
Mechanical Installation
Installation with Adapter Plate
Note: Consider all power wire entry locations and secondary signaling wires
before preparing adapter plate.
Preparation of Adapter Plate
1.
Cut the adapter plate to correct length, L.
2.
Establish the ”hinge center line”, CL 1.
3.
Mark and drill the six holes ø 8 mm (5/16”) for the fi xing of the adapter plate
to the jambs and header. Countersink two holes as shown in the illustration
so that the screw heads do not interfere with the operator.
4.
Mark, drill and thread 6 holes for the fi xing of the operator and 4 holes for
fi xing of the cover mounting clips with end plates.
Locating and Creating Slot in the Cover for the Drive Shaft
1.
Use a 1” hole saw to cut the round hole for the output spindle.
2.
Use a sabre saw to make two straight cuts.
10-21-2002