Berthold MicroPolar LB 566, Руководство пользователя

Страница: 166 / 176

Chapter 10. Error Lists and Device States
74 MicroPolar (++) LB 566
10.3 Measurement Error and Error Prompts
Code Error Possible cause
50 Sigma of phase is
too large The measured phase exceeds
the allowed Sigma limit.
53 No product The evaluation unit is in the
Offline state (no product pre-
sent).
54 No system calibra-
tion done The system calibration has not
yet been carried out.
55 Insertion attenua-
tion is not reached. See Software Manual, chapter 8
60 Current in 1 out of
range The enabled current input has
not yet been calibrated or is not
occupied.
61 Current in 2 out of
range The enabled current input has
not yet been calibrated or is not
occupied.
62 PT100 temperature
out of range The enabled PT100 input has
not yet been calibrated or is not
yet occupied.
70 Concentration out
of range The concentration is outside the
process limits.
71 Concentration 2 out
of range Concentration 2 is outside the
process limits.
90 Current output 1
out of range The concentration calculated on
the basis of the current is out-
side the current range
91 Current output 2
out of range The concentration calculated on
the basis of the current is out-
side the current range
120 Date/Time
not set Please enter the date and time.
For all other error messages, please contact the Berthold
Technologies Service.