Berthold MicroPolar LB 566, Руководство пользователя

Страница: 119 / 176

Chapter 4. Software Functions
MicroPolar (++) LB 566 27
4.2.16 Sampling
The header includes the following information (from left to
right):
 Product no.
 Current table position / Total number of entries
 Sample no. of current table position
 Date and time of sampling
Up to 30 sample entries are possible. The sample can be as-
signed to the lab value either via the sample no. or through
data/time. The sample no. is assigned on a continuous basis.
If a sample is deleted, the sample no. will not be assigned a
second time. Up to 999 sample numbers are available. Only
if all numbers have been assigned, you may assign a number
for the second time; you will be alerted accordingly by a
message on the display.
Next sample:
Continue with the next sample.
Active:
You can choose if this sample should be taken into ac-
count in the calibration.
Measured value:
Display of the measured values, calculated with the actu-
al coefficient.
Lab value:
Entry position for the lab value.
Advanced:
Switches to the next data page.
Delete:
Briefly push the softkey to delete the indicated sample
entry. Push this key for a longer time to delete all sample
entries.
1 | 1/1 | Sample # 1 | 07.05 –13:25
Next sample
Active
Yes
Measured value 65.50%
Lab value 0.00 %
Advanced
◄
DEL
▲▼
..
√..