Berthold 55393 BA2, Руководство по эксплуатации

Страница: 6 / 126

Safety Instructions LB 983 NightSHADE II Operating Manual
6
2 Safety Instructions
Caution! This sign alerts you to important operating procedures with a potential
danger of damaging the equipment and endangering your safety on disobeying.
Refer to the user and instrument manuals for precautionary instructions.
This operating manual includes information and warnings that have to be ob-
served by the user in order to ensure safe operation of the instruments.
Please do always act according to the following safety instructions, before
as well as during operation of the system! Before set up and operation of
the instrument it is necessary to read the instructions below as neither safe
operation of the instrument nor safety of the user are guaranteed otherwise.
Failure to follow the instructions may invalidate the warranty.
The instrument has been manufactured in accordance with the safety require-
ments for electronic and medical measuring systems. If the law lays down regula-
tions on the installation and/or operation of sample measuring system, then it is
the operator’s responsibility to adhere to them.
The manufacturer has done everything possible to guarantee that the equipment
functions safely, both electrically and mechanically. The user has to make sure
that the instrument will be set up and installed properly to guarantee safe opera-
tion.
The instruments are tested by the manufacturer and supplied in a condition that
allows safe and reliable operation.

This equipment must be installed and used in accordance with the manufactur-
er´s recommendations. Installation must be performed by properly trained and
authorized personnel.

The installation category is II.

The instrument may only be operated by personnel who have been trained on the
use of the system. It is strongly recommended that all users read this manual pri-
or to use.

Never reach into the instrument while the unit is in operation, neither with
parts of your body nor with other instruments.

Remove the transportation lock before switching on the instrument.

Use the instrument only for the designated application.

The instrument is designed for indoor use only.

The instrument may not be operated at altitudes above 2000 m above sea level.

The instrument is designed to be operated within a temperature range of 15 to 30
°C.

The instrument is designed to be operated at a maximum relative humidity of 80
% for temperatures up to 31 °C decreasing linearly to 50 % relative humidity up to
40 °C.

BERTHOLD TECHNOLOGIES assumes no liability for any damages, including
those to third parties, caused by improper use or handling of the instrument.

The user is responsible for connecting the instrument in accordance with the valid
regulations for electrical instruments.

Set the instrument up to ensure easy access to the mains switch.