Berthold 55393 BA2, Руководство по эксплуатации

Страница: 114 / 126

Appendix LB 983 NightSHADE II Operating Manual
114
10 Appendix
10.1 Accessories
10.1.1 LED Panels
The LED panels are used to simulate environmental conditions like day / night changes while
the sample is placed inside the dark box and no measurement is running.
The LED panels are available in 2 different versions with the following wvelenght configuration:

Green panel (ID 56589-01)
o
Blue (470nm)
o
Green (520nm)
o
Red (660nm)
o
Far red (730nm)

White panel (ID 56589-10)
o
Blue (470nm)
o
White (warm white)
o
Red (660nm)
o
Far red (730nm)
Make sure to wear standard safety glasses when using the LED panels due
to the possible high intensity of the light source (CE EN 166, EN 172). These
safety glasses ensure that bright, intense light intensity will not harm the be-
holders eyes.
The panels are coded for the left and the right hand side. They are fixed on the upper left and
right side above the sample using the hooked fixing.
The electrical and cooling liquid tubing connections inside of the dark box are shown in the im-
age below:
Connect the LED panels only while the instrument is powered off to prevent electrical damage of
the LED panel.