5 Installation
Shields for Flange Mounting
24
44192BA2, Rev.03, 07/2021
5.3
Installation of the Shield
NOTE
Malfunctions and / or damage to the shield due to impermissible ambient
conditions!
The mounting location and mounting position are determined during the
project planning and defined by drawings, sketches or written instructions.
These instructions must be observed strictly during assembly.
Also note the information in chapter 1 Technical Data and chapter 2
Mounting Layouts in the document "Technical Information" (see appendix).
To avoid unnecessary exposure to radiation, install the shield as final system
component.
Tip
If the shield contains a radioactive source, the measurement of the background
count rate of the detector should take place before the shield is installed.
1
2
3
4
CLOSED
position (lock slide or locking cylinder)
Padlock
Shield head
Handle (only lock slide vaiants)
Fig. 6
Shield closed (
CLOSED
position)
1.
Check if the shield is closed and secured.
- The locking cylinder or the lock slide is turned or pushed in position
CLOSED
.
- The shield head and the padlock are mounted.
- The handle should be removed for safe transport to the flange.