Bertazzoni TUS95L 22 D X La Germania, Инструкция по установке, обслуживанию и эксплуатации

Страница: 10 / 48

10
USING THE VENTILATED ELECTRIC GRILL
The ventilated electric grill is a special function equipped only on the multifunction oven. Set the 9 + 0 switch to the relative
position to activate the grill element (3000W) and the electric fan. Generally, to ensure excellent grilling, place the oven shelf in
the middle position while the oven tray should be inserted at the bottom.
IMPORTANT: When using the ventilated electric grill, set the thermostat knob no higher than 175 °C, which is between
the 150 °C and 200 °C setting, to avoid overheating the front of the appliance. In fact, ventilated grilling must be carried
out with the door closed.
Note:
The cooker is equipped with the cooling fan that starts operation each time the oven knob is on a position different from 0 (zero).
The fan circulates the air between the control panel and the oven door and also allows the control panel and the oven door stay
at a warm temperature during the appliance operation in any condition.
USING THE MINUTE-MINDER
The minute-minder advises the user, with an acoustic signal, when food has been cooked, after a certain time period has
elapsed. To use the device, wind the minute-minder by turning the knob clockwise one complete turn. Then turn the knob
counterclockwise so that the indicator corresponds with the selected cooking time (fig.32A-32B-32C).
WARNING: the acoustic signal does not stop the cooking cycle. The use must turn off the cooking cycle by hand using
the relative knobs.
USING THE 3 KEYS ELECTRONIC PROGRAMMER (fig.33)
The first start up
The numbers and the A letter on the display are blinking when the oven is switched on for the first time, or after a
power cut:
the appliance cannot be operated in this condition
.
To set the hour and/or to enable the appliance to operate press the M key for at least 2 seconds : the A letter turns off
and the numbers now are steady on the display.
The dot (3) starts blinking
: press the - or + key to set the hour .
The hour is accepted by the programmer just few second after having released the key.
N.B. the appliance can be correctly used for coking only when you will see on the display the symbol (2).
The symbols on the display:
1
A
*
Automatic programme is working .
(* in some models there is the writinq 'Auto' instead of A).
2
The appliance i s ready for manual use (not automatic).
3 •
When blinking, the programmer is in setting hour mode .
4 Timer set .
5 -
Decreasing numbers when setting the timer.
Also for choose your desired sound level ( 3 levels available) .
6
M
"Mode" kev to access the programming options of the programme .
7 +
Increasing numbers when setting the timer.
Timer
The purpose of the timer is just of a sound signal, which can be set for a max time of 23h59min . once elapsed the set
time, th e (4) symbol turns off and a sound signal is heard ; this sound set off automatically in 7min, or you can stop it
by pressing any key of the programmer . To set the timer press the M key for 2 seconds, or anyway just to see the (4)
symbol blinking. Set the timer by using the + or - keys. Release the + or - key when you have matched your des i red
tim e . In a few seconds the current time appears on the disp l ay together with the ) symbol . The countdown s tarts
i mmediately from now on.
Semi-automatic cooking
Cooking time : Once having selected a coking function and set the desired temperature, press the M key for a 2
seconds time to access the programming mode. The (4) symbo l appears. Release and press again the M key. On the
display, the A symbol starts blinking and the " dur " writing appears on the display, then it changes to O' 00 . Set the
cooking time with the - or + keys. (max available time: 10h) . The selected time is automatically processed by the
programmer in a few seconds, or you can also touch the M key many times just to see again the current time .
The A and (2) symbols will be on the display . Once the set cooking time is finished, a sound will be heard and the
oven automatically switches off . Please see the fo l lowing paragraphs about how to disable the sound alarm and
restarting the oven .
End of cooking
once having selected a cooking function and set the desired temperature, touch the M key to access the
programming mode for at least 2 sec. the ) symbol switches on. Release and touch again the M key.
On the display the A symbol starts blinking and the writing " dur " appears. Touch again the M key. On the display the
writing "End" appears. The last one changes few seconds after with the symbol 0· 00.
Set the end of cooking time with the keys - or +. (maximum available time
: 10hOOm).
The selected time is automatically processed by the programmer in a few seconds, or you can also touch the M key
many times just to see again the current time
.
The cooking immediately starts, while on the programmer display the current time is shown again in a few s e conds.