Be126 NFPA20 Installation Manual V4XX - 03 Nov - 2018 page 6
6
32.1
DOWNLOADING LOGGER DATA...............................................................
Page 31
33.0
PROGRAMMING PARAMETERS, SETTINGS & OPTIONS........................
Page 32
33.1
PROGRAMMING INSTRUCTIONS..............................................................
Page 33
34.0
READING PARAMETERS, SETTINGS & OPTIONS...................................
Page 33
35.0
RECOVERING A LOST PASSWORD..........................................................
Page 34
36.0
ALARMS WARNINGS & SHUTDOWNS......................................................
Page 34
37.0
DETECTING ENGINE RUNNING.................................................................
Page 37
38.0
GENERAL SPECIFICATIONS......................................................................
Page 38
39.0
SOFTWARE UPGRADES & REVISIONS....................................................
Page 38
40.0
TERMINAL DESCRIPTION..........................................................................
Page 39
41.0
TYPICAL WIRING DIAGRAM.......................................................................
Page 43
42.0
REAR VIEW AND DIMENSIONS.................................................................
Page 44
!! WARNING !!
The Be126 can start the engine at anytime. Do not work on equipment, which is controlled by the Be126. When servicing the engine,
disconnect the battery and battery charger. We recommend that warning signs be placed on equipment indicating the above.
MAINS OR POWER UTILITY VOLTAGE MAY BE EXPOSED WITHIN THE BE126 AND ANCILLARY CIRCUITRY
EVEN WHEN ALL INDICATORS, PLACED ON THE FRONT, PANEL ARE TRUNED OFF.
