Page 4 of 18
26.08.2014
Ver. 1.5
Copyright Berner Kochsysteme 2014
Description of warning symbols and indicators
General warning signals
If you don`t follow the safety instruction, you will place yourself in danger of
injuries!
This
symbol warning from dangerous voltage.
(Picture sign 5036 der IEC 60417-1)
Warning symbols that are located directly on the equipment must always be
observed. Their readability must be ensured at all times.
Danger result from not observing the safety instructions
Not observing the safety instructions, may lead to danger for people, the surroundings, and
the unit itself. We are not liable for any damages caused by a failure to observe the safety
instructions.
In detail, ignore of the safety instruction can lead to risk of for example:
-
Risk of personal injuries as a result of electric factors
-
Risk of personal injuries because of overheated cookware (pans, spoons etc…)
-
Risk of personal injuries because of overheated heating zones
Safe application
The safety instructions, the existing national regulations for electricity for the prevention of
accidents as well as any house work, application and safety regulations must be followed.
Safety instruction for the operating staff
-
Never fight oil or grease fire with water (risk of explosion)!
-
To fire-fighting against grease or oil use appropriate aids. Switch off the unit, pull out the
plug or disconnect the device from the power supply. Therefore, appropriate equipment
must be available: e.g. Fire blankets and fire extinguishers suitable for extinguishing
burning fat.
-
Don`t leave the unit unattended. Don`t use the heating zone as a working surface!
-
Do not put paper, carton, textiles, etc. on the heating zones – they could catch fire.
Aluminium foil and plastic containers may not be placed on the hot surfaces.
-
PLEASE NOTE: Warning of potentially slippery surfaces in the vicinity of the device. This
can lead to injury.
-
Prevent liquids from entering the equipment, and try not to let water or food flow over the
pan edge. Do not jet-clean the equipment.
Improper operation
The working of the unit can only be guaranteed when it’s used correctly. The equipment must
always be operated within the limits given in the technical data.
Modification / use of spare parts
Contact the manufacturer if you intend to make any modifications to the equipment. For
safety reasons, always use original parts and accessories only which have been approved by
the manufacturer. If you use anything other than the original components, the manufacturer
will not assume any liability for any costs that result. Attention! During disassembly,
inspections or repairs look for stability of the unit.
Attention
Before you connect or use the unit, you
have to read the operation instructions
Attention
Improper use may result in minor injuries
or damages.
Attention! In case of replacements of the parts, the device must be “visible
disconnected" from the power supply.
