Berner BGI40, Руководство по эксплуатации

Страница: 5 / 34

side 4 from 34 08.11.2014
Ver. 2.9 © Berner cooking systems 2014
Safety regulations
Description of Hazard Symbols
General danger symbol
Failure to comply with safety regulations
means danger ( injuries )
This symbol warns of dangerous tension.
(Figurine 5036 of IEC 60417-1)
This symbol warns against non-ionizing electromagnetic
radiation. (Figurine 5140 of IEC 60417-1)
Danger symbols directly attached to the device must be followed and readability
must be ensured at all times.
Dangers in case ofnon-observance of safetyregulations
Failure to comply with the safety regulations can lead to danger to persons, the environment
and to the inductionsystemitself. In the event of non-compliance with the safety regulations,
there is no right to claim any damages.
In detail, failure to observe the following risks may result in the following risks
( Examples):
-
Danger to persons due to electrical causes
-
Danger to people from overheated pans
-
Danger to persons due to overheated storage area
Safe use
The safety provisions of this manual, the existing national rules on electricity to prevent
accidents and any internal working, application andsafetyregulations must be followed.
attention
In case of improper use
may cause minor injuries or
damage to property!
attention
The user manual must be read before using or
maintaining the device.