Berner BGI40, Руководство по эксплуатации

Страница: 28 / 34

side 27 from 34 08.11.2014
Ver. 2.9 © Berner cooking systems 2014
Be sure to observe the following installation instructions:
The size of the section can be found under
www.induktion.de/download.html
in the technical data installation
section.
An edge at the edge of the cut-out by 10-12
mm prevents the penetration
of liquids. It must
be sealed to the
frying plate with a circumferential
Pactancaterpillar (heat-resistant silicone)
to absorb
an extension of
the plate during operation.
The length extension of a 600 mm plate is approx. 2.5 mm and
requires a circumferential expansion joint of at least
4 mm when
flush.
For larger frying plates, the size of the expansion joint
must be increased
accordingly.
Insufficient expansion joint dissipates the length expansion
of the plate during operation onto the frying plate frame and leads
to
stress
cracks
in
the welds.
airflow
Air flow module
Air way coil generator Separate ( Standing / Lying)