Bernecker + Rainer 4MP181.0843-03, Руководство пользователя

Страница: 14 / 160

14
General Information • Safety Regulations
Mobile Panel User's Manual V 1.5
systems, flight safety, the control of mass transportation systems, medical life support systems,
and the control of weapons systems.
The safety precautions applying to industrial control systems (e.g. the provision of safety devices
such as emergency stop circuits, etc.) in accordance with applicable national and international
regulations must be observed both when using programmable logic controllers and when using
operating and monitoring devices as control systems in conjunction with a Soft PLC (e.g. B&R
Automation Runtime or comparable products) or a Slot PLC (e.g. B&R LS251 or comparable
products). The same applies for all other devices connected to the system, such as drives.
All tasks such as installation, commissioning and service may only be carried out by qualified
personnel. Qualified personnel are persons who are familiar with the transport, mounting,
installation, commissioning and operation of the product and have the appropriate qualifications
(e.g. IEC 60364). National accident prevention guidelines must be followed.
The safety guidelines, connection descriptions (rating plate and documentation) and limit values
listed in the technical data must be read carefully before installation and commissioning and
must be observed.
4.2 Intended Use
Electronic devices are generally not fail-safe. In the event of a failure on the programmable
control system, operating or monitoring device or uninterruptible power supply, the user is
responsible for ensuring that other devices that may be connected, such as motors, are made
safe.
4.3 Transport and Storage
During transport and storage, devices must be protected from excessive stress (mechanical
load, temperature, humidity, aggressive atmosphere).
4.4 Mounting
• The installation must take place according to the documentation using suitable
equipment and tools.
• The devices are only allowed to be installed without voltage applied and by qualified
personnel.
• General safety regulations and nationally applicable accident prevention guidelines must
be observed.
• Electrical installation must be carried out according to the relevant guidelines (e.g. line
cross section, fuse, protective ground connection).