Bernecker + Rainer 4MP181.0843-03, Руководство пользователя

Страница: 84 / 160

84
Start-up / Operation • Operating the Mobile Panel Device
Mobile Panel User's Manual V 1.5
2. Operating the Mobile Panel Device
Caution!
• Make sure that cables are safely out of the way on the floor to prevent any
tripping which may result in the Mobile Panel device falling to the ground.
• The Mobile Panel connection cable may not be pinched or come into contact
with sharp corners, which would result in damage to the cable or its
sheathing.
• Operating a Mobile Panel with a damaged connection or switching cabinet
cable is not permitted.
• When not using the Mobile Panel, it should be safely stowed away on its wall
mount. When the Mobile Panel device is stored on its wall mount, the
connection cable must still be connected so that the E-stop button can be
activated in dangerous machine areas.
• When laying down the Mobile Panel device for a short period of time, do not
place it in such a way that its entry device could be damaged or where it may
inadvertently trigger an action. Also, do not place it on unstable surfaces
where it may fall. It should never be placed near heat sources or in direct
sunlight.
• Although the Mobile Panel device has been designed for use in harsh
industrial environments, it should still not come into contact with large
amounts of dust or humidity, excessive mechanical shocks, or strong
magnetic fields.
• The touch screen may not be operated with sharp objects such as ballpoint
pens, knives, screwdrivers, etc. These objects will permanently damage the
touch screen. The ideal object for operating the touch screen is the touch
screen pen (see "Touch Screen Pen", on page 30). Operating the touch
screen with a finger is also allowed.
• When operating the touch screen, only one point at a time be touched.
Touching several places at once can cause unintended actions.
• Do not place object on top of the touch screen.
• If the Mobile Panel device has sustained a severe shock (e.g. if it has fallen),
then the CF / USB cover fitting must be checked directly afterwards. If a
Compact Flash card had been inserted into the Compact Flash slot at the time
of impact, then this fitting must be checked as well. The safety features on the
Mobile Panel must also be inspected (E-stop button, key switch, enable
switch).