5. Indoor
Wet & Dry Cleaning
Please proceed as follows when using the device for indoor wet and dry cleaning:
Screw the drain hole cap (5) securely to the base of the collection tank over the water discharge hole
(8). This will create a vacuum inside the collection tank.
For wet vacuuming
, open the two locking clips (6) on the side of the collection tank (8) and remove
the motor head (1). Fit the filter sponge (13) over the motor head (1). Tighten the cord around the
motor head. Place the motor head back onto the collection tank, ensuring the locking clips are
relocated back into the corresponding indents on the collection tank, with the electrical cable
positioned on the opposite side to the suction hose plug-in connector hole (7).
For dry vacuuming
, open the two locking clips (6) on the side of the collection tank (8) and remove
the motor head (1). Attach the paper bag (15) to the inside of the collection chamber over the hose
plug-in connector hole ensuring that the rubber seal on the paper bag fits over the indent on the
plug-in connector hole. Place the motor head back onto the collection tank, ensuring the locking clips
are relocated back into the corresponding indents on the collection tank, with the electrical cable
positioned on the opposite side to the suction hose plug-in connector hole (7).
Once the above has been completed, plug the device into the RCD. To turn on, push the switch (2) to
1 MANUAL. In this position, the device operates continuously.
Switch off the device after use by pushing the switch to the OFF position (0).
6. Maintenance and cleaning
Always ensure that the device is unplugged from the RCD before attempting any maintenance
or cleaning.
The Pondi requires little maintenance other than cleaning.
Thoroughly clean the collection chamber (8) and dirt collecting bag (4) with water and mild household
detergent.
Check suction hose (9), suction tube extensions (10) and drain hose (3) occasionally for possible
blocking or dirt residues and clean when necessary.
Carefully wash the filter sponge for the motor (13) with water and mild household detergent. Dry for
storage.
When storing, ensure all parts are completely dry and store in a dry, frost free area which is
inaccessible to children.
GUARANTEE
The product is guaranteed for 1 year from the date of purchase on materials and manufacturing defects. Every effort has been made
during the manufacturing process to ensure the Pondi meets the rigid quality standards. However, should you need to make a claim
under this Guarantee, please return the product to the place of purchase with the original receipt as proof of purchase. Claims brought
about by incorrect installation or operation, inadequate maintenance, the effects of frost, inexpert attempts at repair, the use of force,
wrongful acts by a third-party, overloading and foreign objects, as well as all damage to parts resulting from wear and tear, are not
covered by this guarantee. By virtue of the Product Liability Act, we are not liable for damage caused by our equipment, if this is the
result of an inexpert repair. Replacement parts can be obtained by telephoning Bermuda Customer Care on 01905 798666.
Environmental Protection
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice.
Follow us on Facebook @ Bermuda Water Gardening
EXCLUSIVELY DISTRIBUTED BY:
SOLUS GARDEN & LEISURE LIMITED, BERRY HILL INDUSTRIAL ESTATE,
DROITWICH, WORCESTERSHIRE, WR9 9AB. TEL: 01905 798666
