Thank you for purchasing the Bermuda Pondi Multipurpose Pondvac, a high-quality product based on the
newest state-of-the-art technology. The Pondi is suitable for use in garden ponds, but can also be used as a
wet and dry vacuum cleaner around the home and garden. It is not suitable for professional use, or for
emptying ponds, pools and other containers.
Please read the following instructions carefully and thoroughly.
Failure to comply with these requirements
could cause serious injury and may result in product damage or failure.
1 Safety Warnings
The power supply must correspond to the product specification. If necessary, ask for information from
your local electricity supplier regarding connection regulations. Do not connect the device if these do
not meet the mentioned regulations (the voltage specification must match the operating voltage).
The device must be connected to a 30mA RCD (Residual Current Device) for prevent the possibility
of electric shock and to comply with Europe safety standards. Further information is available from
your local electricity specialist.
The device must be fully assembled before use.
Packing parts may be dangerous (e.g. plastic bags). Therefore, store away from children, domestic
animals and anyone incapable of understanding the dangers. This device is not a toy.
When cleaning a pond, the device should be positioned with a clearance of 2 metres from the waters
edge.
Never leave the device unattended.
Never carry or pull the device by the power cable.
Do not pull the device behind you by the hose during operation.
Do not cut off the plug and do not shorten the cable. Your guarantee becomes invalid if this is not
observed.
When using outdoors, ensure that the plug and socket are completely dry.
Never touch the plug with wet hands.
When the device is switched on do not hold the suction nozzle close to sensitive body parts like eyes,
ears or mouth.
Before emptying the vessel, switch off the device and remove the plug from the RCD.
Always switch off the vacuum cleaner and pull out the plug before cleaning the device. Do not
immerse the motor head (1) into water for cleaning purposes or clean with a water jet.
This device is suitable for sucking water with a maximum temperature of 35 degrees.
Replacement of the electric cable is not possible. The device must not be operated in the case of a
defective electric cable or housing.
Do not suck up flammable, explosive, poisonous or health hazardous materials with the device.
We take no responsibility for any damage to persons and objects, caused by incorrect use of the
device or by not observing these operating instructions.
2. Prior to 1
st
Time Use
Please read the operating instruction thoroughly.
Remove all the accessories and packages from the box and inside the main body collection tank (8).
Check before and after use that the switch is in OFF (0) position.
Always use the device with the correct filter insert suitable for the relevant application, i.e. filter
sponge (13) for wet usage, paper bag (15) for dry usage.
Attach the 4 wheel holders onto the 4 location points on the base of the main body collection tank (8)
by pushing down firmly to secure. Push the 4 wheels (14) into the location holes on the wheel
holders. The slots on the wheel holders can be used to hold the tools (see photograph on front).
