picture 2: Adjusters on the rear
(1) Flush-mounted insert
(2) Frame
(3) Motion detector cover
(4) Operating mode switch
(5) Adjuster, run-on time
(6) Adjuster, brightness
(7) Adjuster, sensitivity
3 Function
Intended use
-
Automatic switching of lighting depending on the heat motion and ambient brightness.
-
Operation with concealed insert for dimming, switching or extension insert, 3-wire
-
Interior mounting on concealed insert
Product characteristics
-
Run-on time, sensitivity and brightness threshold settable
-
Teach function to adjust the brightness threshold
-
Operating mode switch for Automatic operation, Continuous on or Continuous off
-
Short-time operation, e.g. to control acoustic signal encoders
-
Manual switch-on possible via extension insert, 2-wire, or installation button
-
With the dimmer insert, it is possible to change the brightness using a 2-wire extension
insert
-
Switch-on brightness can be saved with the dimmer insert
-
With the dimmer insert, the dim-down function is possible at the end of the run-on time
-
18 lens segments in 2 recording levels
-
Extension of the detection area in combination with the 3-wire extension insert
-
Detection area can be limited using cover plate
-
High protection against ambient light
Automatic operation
The controller detects heat motions of people, animals and objects.
-
The light is switched on if a person enters the monitored detection area and the brightness
is below the set threshold.
Each detected movement restarts the run-on time.
-
The light is switched off if no more movement is detected in the detection area and the set
run-on time has elapsed.
Seite 2/10
22.07.2010
82540231
97-82640-201
BLC
BLC motion detector comfort 1.1 m
