picture 4
The operating mode switch can be locked in the
AUTO
position using a locking screw (8) on the
back of the top.
o
For this, screw in the supplied screw from the rear side of the cover into the intended
opening (8).
The position of the operating mode switch can no longer be changed.
Changing the brightness threshold with the Teach function
The Teach function can be used to save the current ambient brightness as a brightness
threshold. The value set on the Brightness setter (6) is then no longer evaluated. Additional
saving operations overwrite the previous value.
i
A power failure of more than 2 seconds or removing the cover from the insert causes the
loss of the saved brightness threshold. The brightness threshold set on the adjuster (6) is
reactivated.
i
If a brightness value of more than 150 lux is saved as the brightness threshold, then the
motion detector is in Day mode and switches irrespectively of the brightness.
picture 5: Activating the Teach function
o
Activating the Teach function: completely cover the motion detector three times within
9 seconds(picture 5).
Seite 5/10
22.07.2010
82540231
97-82640-201
BLC
BLC motion detector comfort 1.1 m
