Page 3/13
6W-5826
09-2012
IR motion detector comfort
The function is not impaired.
–
Mains breakdown longer than 0.2 s:
There is no function during the mains breakdown. The current configuration is saved in
non-volatile memory.
–
Return of mains supply:
The application module executes an initialisation for approx. 15 s, during which the lighting
will be switched on. Motion detection starts thereafter. If no motion is detected during the
first 5 s, the lighting is switched off. The saved configuration is loaded from memory. During
this period local operation via the button or extension unit can be used.
4. Operation
Operating concept
(8)
(7)
Fig. 2: Operating and display elements
(7) Button
(8) Status LED
Operation is executed by pushing the button (7) on the motion detector:
–
A short press of the button switches the operating modes. The operating mode is displayed
via the status LED behind the optics cover of the motion detector.
–
Keeping the button pressed activates special functions. Selection of the special functions is
supported by the LED display (Fig. 3).
Function
Party function
Teach-In
Keylock
Presence
simulation
Load setting
mode
LED display
Hold time
operation
button
> 5 s
> 10 s
> 15 s
> 20 s
> 25 s
1)
Only on universal switch insert and universal flush-mounted dimmer
Fig. 3: Selection of the special functions and LED display
Selecting the operating mode
Briefly press the button repeatedly until the desired operating mode is selected.
The status LED indicates the selected operating mode (see Table 1).
Switching the operating mode finishes the party function or presence simulation, if these
functions were previously active.
