7. MAINTENANCE AND REPAIRS
7.1 GENERAL INFORMATION
The operator is allowed to carry out the
following maintenance:
- Blade sharpening, periodically; the interval and
length of the sharpening obviously depend on the use
of the machine (work times and type of product used).
- Lubrication of the carriage guide bars
and overplate:weekly;
- Adjustment of the blade drive chain
necessary, see the relative paragraph.
- Adjustment of the bevel gear pair: as necessary,
see the relative paragraph.
Maintenance to be carried out exclusively by personnel
authorised by the manufacturer is as follows:
- Replacing the blade;
- Replacing the sharpener
grindstones; - Replacing the chain;
- Repairing the structural parts, repairing
and/or replacing components under the base.
7.2 SHARPENING THE BLADE
Proceed as follows as soon as it is noticed that there is
less cutting capacity:
WARNING: Danger of cutting!
Use protective gloves which are resistant to cutting
and tearing and concentrate on the job at hand.
PAY CAREFUL ATTENTION!
- Loose the knob of handle grip of the sharpener.
- Lift the sharpener and to rotate him/it of 180°.
- Low with attention the sharpener, the blade
will center automatically among the two grindstones.
- Block the knob.
- Rotate the volano and to press contemporarily,
for about 10-15 seconds, the buttons.
- Interrupt the rotation and to check on the blade if a light
drivel is formed.
- Than put in rotation the badminton and press
contemporarily the button for 2-3 seconds.
- Put the sharpener in the native position. .
Note: do not insist more than 2-3 seconds with the
burring operation so as to avoid damage to the edge
of the blade.
P15 Series
, periodically; the interval and
of the sharpening obviously depend on the use
of the machine (work times and type of product used).
Lubrication of the carriage guide bars
Adjustment of the blade drive chain: as
: as necessary,
Maintenance to be carried out exclusively by personnel
Repairing the structural parts, repairing
ents under the base.
1
Proceed as follows as soon as it is noticed that there is
Use protective gloves which are resistant to cutting
and tearing and concentrate on the job at hand.
Loose the knob of handle grip of the sharpener.
3
Lift the sharpener and to rotate him/it of 180°.
Low with attention the sharpener, the blade
will center automatically among the two grindstones.
Rotate the volano and to press contemporarily,
Interrupt the rotation and to check on the blade if a light
4
Than put in rotation the badminton and press
3 seconds with the
burring operation so as to avoid damage to the edge
16
12-12-
User Manual
2
5
-07 UM – CodeF2 - Rev. 0.1
