5. INSTALLATION
5.1 INSTALLATION OF THE MACHINE
If a support column (optional) is not used, install the
machine on a surface which is level, dry and suitable for
the weight of the machine plus the food to be sliced;
refer to paragraph 3.1.
Check that there is nothing that can get in the way of
the flywheel, carriage movement and food loading.
5.2 COMMAND DESCRIPTION
5.2.1 MANOEUVRING FLYWHEEL
The flywheel (1) turned clockwise allows the carriage
to be moved with the food plate with simultaneous
blade rotation.
5.2.2 REGULATING KNOB FOR SLICE THICKNESS
The thickness of the slice is regulated by turning
the graduated scale knob (2) clockwise.
Regulating field: see paragraph 3.2.
5.2.3 OVERPLATE ADVANCE HANDWHEEL
The handwheel (3) allows the overplate with the
product to be brought quickly near to the blade after
loading it or taken away from the blade after cutting or
for small regulations.
5.2.4 OVERPLATE RAPID ADVANCE LEVER
By moving it downwards and keeping it there, the lever
(4), allows rapid movement of the overplate, towards the
blade or away from it after cutting.This operation is
much quicker than with the handwheel (3).
P15 Series
5.1 INSTALLATION OF THE MACHINE
If a support column (optional) is not used, install the
machine on a surface which is level, dry and suitable for
the weight of the machine plus the food to be sliced;
Check that there is nothing that can get in the way of
heel, carriage movement and food loading.
The flywheel (1) turned clockwise allows the carriage
to be moved with the food plate with simultaneous
5.2.2 REGULATING KNOB FOR SLICE THICKNESS
The thickness of the slice is regulated by turning
5.2.3 OVERPLATE ADVANCE HANDWHEEL
The handwheel (3) allows the overplate with the
roduct to be brought quickly near to the blade after
loading it or taken away from the blade after cutting or
5.2.4 OVERPLATE RAPID ADVANCE LEVER
By moving it downwards and keeping it there, the lever
the overplate, towards the
blade or away from it after cutting.This operation is
4
1
13
12-12-
1
User Manual
2
-07 UM – CodeF2 - Rev. 0.1
3
2
4
