BERG EasyKit Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 45

BERG EasyKit Скачать руководство пользователя страница 8

Translated user manual

EasyKit

page 8 of 45

3.4 General safety measures

-

Always read the handbook thoroughly before starting to operate the equipment, then
carefully follow the instructions and directions. In case of doubt, please contact the
Berg Hortimotive dealer for further information.

-

The

EasyKit

is only suitable for operating on pipe rail systems that comply with the

horticulture sector guidelines, the health and safety catalog in force in the
Netherlands

(see chapter 6.2).

-

The

EasyKit

should only be used on the correct type of pipe rail system. You must

ensure that the centre-to-centre measurement of the pipes rails and the

EasyKit

correspond with each other - see chapter 10: Specifications. This is also visible on
the pictogram on the plating.

-

The

EasyKit

may only be operated once it has been placed entirely on the pipe rail

system.

-

Never exceed the maximum load capacity of the

EasyKit

as indicated in the machine

specifications - see chapter 10. Always stand on the working platform - it is forbidden
to raise the platform using any objects.

-

The

EasyKit

may not be switched on when the protective covers are not properly in

place. Prior to switching on the

EasyKit

all protective covers must be properly put

back in place.

-

Always switch off the

EasyKit

prior to carrying out maintenance, repairs or

inspections. Always switch off the

EasyKit

using the earth switch.

-

Always take up the slack in the operating cable by gathering it up using the Velcro
strips provided. This reduces the chances of it becoming caught on something.

-

After use, the

EasyKit

should always we turned off with the earth switch, the direction

switch should be in the neutral position and the potentiometer should be at zero.

-

The

EasyKit

should never be left unattended while the earth switch is still turned on.

-

Only authorised, properly trained personnel of at least 18 years of age should be
allowed to operate the

EasyKit

. Personnel should be fully aware of the directions and

instructions contained in this handbook. Keep your wits about you when using the

EasyKit

. Do not use the

EasyKit

if you are unable to concentrate, under the influence

of narcotics (alcohol or drugs) or when using medicines which advise against
operating machinery or driving in traffic when being taken.

-

All personnel working in the area of the

EasyKit

should be made familiar with relevant

safety rules and precautions that apply to it. The employer must ensure that the
personnel are fully aware of all the safety precautions that must be taken.

-

Only use the

EasyKit

for the purposes for which it was designed. The

EasyKit

may

only be used for maintaining crops in greenhouses. Never use the machine on the
public highway.

-

Using the

EasyKit

when it is tilting more than 2 degrees from the vertical (lengthwise

and/or crosswise) is strictly forbidden.

«
...
6
7
8
9
10
...
»

Содержание EasyKit














































Отзывы:

Нет отзывов