BERG EasyKit Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 45

BERG EasyKit Скачать руководство пользователя страница 15

Translated user manual

EasyKit

page 15 of 45

Ensure that the recommendations from the manual with respect to voltage (V)
and frequency (Hz) are respected. Always remove the charger plug before
using the

EasyKit

.

Additional options, accessories and spares must be ordered and supplied
exclusively by the manufacturer, Berg Hortimotive.

Safety pictograms attached to the

EasyKit

(see chapter 3.2: Review of the

safety pictograms that are used), must always be clearly visible.

Extra care must be given during installation!
The chances of incorrect functioning during start-up is higher than normal. If
the

EasyKit

is not set up correctly, this can lead to greater exposure to danger.

Please ensure that all locks and fixings have been correctly applied.

The

EasyKit

has been specially designed to run on a pipe rail system. When leaving the Berg

Hortimotive factory, the

EasyKit

is checked for proper functioning and safety. Before starting

up the

EasyKit

, the items described at section 6.1 should be inspected.

The  pipe  rail  system  must  comply  with  the  requirements  as  laid  down  by  the  horticulture
sector  guidelines.  Article  6.3  in  the  guidelines  provides  information  regarding  the  minimum
pipe  rail  specifications  with  respect  to  the  track  width,  pipe  diameter  and  the  distance
between supports.

The pipe rail specification given on the EasyKit are taken from the requirements laid down by
the horticulture sector guidelines for pipe rail systems from  the health and safety catalog in
force  in  the  Netherlands.  For  the  full  contents  of  this  policy  regulation,  we  refer  you  to  the
Ministry of Social Affairs & Employment.

«
...
13
14
15
16
17
...
»

Содержание EasyKit














































Отзывы:

Нет отзывов